Blueskin^® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin^® SA is designed to install easily on a variety of prepared substrates.

Features

• SBS-modified membrane is flexible at low temperatures
• Adheres to prepared concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood
• Self-sealing when penetrated with self-tapping screws
• Excellent compatibility with most Henry adhesives and liquid air barrier membranes
• Various roll widths allow for application flexibility as either air barrier membrane on wall surfaces, or as window/door/penetration flashing

Packaging

• Roll length: 75’
• Roll widths: 4”, 6”, 9”, 12”, 18” and 36”

Complete the system

Air-Bloc All Weather STPE^®

Air-Bloc^® LF Liquid-Applied Flashing

Blueskin^® TWF

Metal Clad^®

Blueskin^® SA LT

Literature

Submittal Packet: Blueskin® SA Self-Adhered Air and Vapor Barrier System

Commercial Air Barrier Systems Brochure

Commercial Air Barrier Systems Selection Chart

Blueskin^® SA Declare Label

ABAA Air Barrier Material Evaluated Certificate

Henry Commercial MasterFormat Product Organizer

Inflation Reduction Act Summary for Commercial Buildings

Inflation Reduction Act ASHRAE 90.1 White Paper

5 Quick Tips for Air Barrier Selection

How to Chose the Right Air Barrier for Your Next Project

2021 IBC and IECC Changes Affecting Air and Water Barriers

• Installation and Technical Literature

  Blueskin^® SA Data Sheet  

  Blueskin^® SA SDS Sheet  

  Blueskin^® SA Health Product Declaration  

• Tech-Talks

  Henry Air Barrier and Waterproofing Membranes Earn Living Building Challenge Declare "Red List Free" Status

  NFPA 285 Assemblies

  Fastener penetrations through air barrier membranes

  Henry® Air Barrier Assemblies Meet ASTM E2357

  Blueskin^® SA Application on Dens Glass Gold

  Blueskin^® SA Application Tips

  Henry^® Self-Adhered, Rubberized Asphaltic Membranes / Chemical Compatibility

  Henry^® Living Building Challenge Red List

• Specifications

  Blueskin^® SA and SA LT Guide Spec  

• Architectural Details

  BSSA-TID3A Blueskin SA transition with Pumadeq System

  BSSA-1A Wall Foundation Slab Below Grade

  BSSA-1B Wall Foundation Slab on Grade

  BSSA-1C Wall Foundation Transition No Brick Ledge

  BSSA-2A Pipe Penetration 0.5 Inch Wide Gap Max

  BSSA-2B Pipe Penetration 0.75 Inch Wide Gap Max

  BSSA-3A Inside and Outside Corners

  BSSA-3B Inside and Outside Corners

  BSSA-3C Inside and Outside Corners

  BSSA-4A Substrate Transition

  BSSA-4B Substrate Transition

  BSSA-5A Thru-Wall Flashing

  BSSA-6A1-A Flanged Window Section Method A1

  BSSA-6A1-B Flanged Window Sequence Installation Method A1

  BSSA-6A-A Flanged Window Section Method A

  BSSA-6A-B Flanged Window Sequence Installation Method A

  BSSA-6B1-A Non-Flanged Window Section Method B1

  BSSA-6B1-B Non-Flanged Window Sequence Installation Method B1

  BSSA-6B-A Non-Flanged Window Section Method B

  BSSA-6B-B Non-Flanged Window Sequence Installation Method B

  BSSA-6C Door Frame Section

  BSSA-7A Reverse-Lap

  BSSA-8A Construction Joints 0.5-Inch Gap Max

  BSSA-8B Construction Joints 1-Inch Gap Max

  BSSA-8C Construction Joints 2-Inch Gap Max

  BSSA-8D Deflection Joint

  BSSA-8E Cracks 0.5-Inch Gap Max

  BSSA-9A Roofing Wrapping Parapet

  BSSA-9B Air Barrier Transition at Parapet

• LEED Declarations

  Blueskin® SA LEED Declarations

• Health Product Declarations

  Blueskin® SA Health Product Declaration

• Videos

  Henry^® Blueskin Self Adhesive Membrane Primers

  How to flash a window opening with self-adhered flashing membrane

Tools