PremiR+® EVO

A spray-in-place insulation made of rigid, closed-cell polyurethane foam

PremiR+<sup>®</sup> EVO<sup>™</sup>

PremiR+® EVO

Spray Polyurethane Foam

PremiR+ EVO is a spray-in-place insulation made of rigid, closed-cell polyurethane foam (SPF). It’s a fully adhered, seamless system that seals all penetrations with no joints or fasteners and can be sprayed in a way that builds slowly to enhance drainage and eliminate ponding water. PremiR+ EVO can be used in most retrofit and new construction roofing applications.

This two-component SPF consists of PremiR+ EVO B Component resin and A Component. It provides an R-value of 6.5 per inch and a continuous insulation without thermal breaks. PremiR+ EVO does not contain any HCFCs, HFCs or ozone-depleting blowing agents.

Features

  • Provides a fully adhered, monolithic, sustainable air barrier and thermal insulation
  • Superior yield reduces cost and amount of material required
  • Enhanced wind uplift resistance for a fully adhered roof system
  • Yields a smooth surface, reducing the need for extra coating
  • Self-flashing, seamless application
  • Does not contain any HFCs or HCFCs

Packaging

  • Component A: 55-gallon drum (591 lbs.)
  • Component B: 55-gallon drum (540 lbs.)

Related products

Literature

  • Installation and Technical Literature

    PremiR+ EVO 40 Series SDS Sheet Click to download  

    PremiR+ EVO 40 Series Data Sheet Click to download  

    PremiR+ EVO 60 Series SDS Sheet Click to download  

    PremiR+ EVO 60 Series Data Sheet Click to download  

    PremiR+ EVO 70 Series SDS Sheet Click to download  

    PremiR+ EVO 70 Series Data Sheet Click to download  

    PremiR+ EVO 80 Series SDS Sheet Click to download  

    PremiR+ EVO 80 Series Data Sheet Click to download