Blueskin PreSeal® 320

Henry Blueskin PreSeal System , pre-applied waterproofing system
play video
Blueskin PreSeal 320 Product Image

Blueskin PreSeal® 320

Schedule a Meeting

Pre-Applied Waterproofing Membrane

Blueskin PreSeal 320 is a pre-applied, fully, and permanently bonded composite sheet membrane for commercial foundation waterproofing applications. The membrane contains an adhesive and provides for mechanical attachment into wet concrete to form a permanent barrier seal. 

Sizes Available:

3.3'

Width

6.6'

65.6'

Length

Product Details

Blueskin PreSeal™ 320 is a pre-applied, fully, and permanently bonded composite sheet membrane for commercial foundation waterproofing applications. The membrane contains an adhesive and provides for mechanical attachment into wet concrete to form a permanent barrier seal. Blueskin PreSeal 320 consists of a polypropylene membrane laminated to a chemically enhanced non-woven geotextile fleece with a dimpled surface. Blueskin PreSeal 320 is pre-applied prior to rebar installation and concrete placement.

  • Barrier to water-vapor and radon gas permeation
  • High chemical resistance

In partnership with Max Frank logo

  • Proprietary dual bond technology provides full mechanical and adhesive bond to the concrete.

  • Fully adheres to substrates eliminating water migration.

  • Easy installation with self-adhering laps and splices (no tools or torches required)

  • Wider roll width results in fewer seams, reducing risk of water ingress

  • Better cold weather flexibility than polyethylene based membranes

Technical & Installation

  • Blueskin PreSeal 320 | Tech Data Sheet (TDS)

    Download

    file-icon

  • Blueskin PreSeal Tape 50S | Tech Data Sheet (TDS)

    Download

    file-icon

  • Blueskin PreSeal Tape 120V | Tech Data Sheet (TDS)

    Download

    file-icon

  • Blueskin PreSeal 320 | Safety Data Sheet (SDS)

    Download

    file-icon

  • Blueskin PreSeal Tape 50S | Safety Data Sheet (SDS)

    Download

    file-icon

  • Blueskin PreSeal Tape 120V | Safety Data Sheet (SDS)

    Download

    file-icon

  • Blueskin PreSeal® Guide Specification-Cast in Place

    Download

    file-icon

  • Blueskin PreSeal® Guide Specification-Shotcrete

    Download

    file-icon

  • BSPS-00.1 Detail index – Blueskin PreSeal 320 and Blueskin PreSeal 435

    Download

    file-icon

  • BSPS-0A.1A – Blueskin PreSeal under single reinforced slab on mud slab

    Download

    file-icon

  • BSPS 0A.2A Blueskin PreSeal under single reinforced slab on compacted earth

    Download

    file-icon

  • BSPS 0B.1A Blueskin PreSeal under double reinforced slab on mud slab

    Download

    file-icon

  • BSPS 0B.2A Blueskin PreSeal under double reinforced slab on compacted earth

    Download

    file-icon

  • BSPS 0C Blueskin PreSeal field membrane installation

    Download

    file-icon

  • BSPS 0E.1 Concrete caisson walls

    Download

    file-icon

  • BSPS 0E.2 Concrete secant walls

    Download

    file-icon

  • BSPS 0E.3 Sheet pile walls

    Download

    file-icon

  • BSPS 0E.4 Wood lagging walls

    Download

    file-icon

  • BSPS 1A.1 Slab to wall transition Blueskin PreSeal on lagging

    Download

    file-icon

  • BSPS 1A.2 Slab to wall transition Blueskin PreSeal transition to Blueskin WP200

    Download

    file-icon

  • BSPS 1B.1 Slab to wall transition Blueskin PreSeal fastened to lagging

    Download

    file-icon

  • BSPS 1C.1A Slab to wall transition Blueskin WP200 transition at footing

    Download

    file-icon

  • BSPS 1C.1C Slab to wall transition Blueskin WP200 transition at slab

    Download

    file-icon

  • BSPS 1C.2 Slab to wall transition CM100 transition at footing

    Download

    file-icon

  • BSPS 1E.1 Elevated slab Blueskin WP200 transition at footing or grade beam

    Download

    file-icon

  • BSPS 1F.1A Straight edge penetration at waler raker or I beam

    Download

    file-icon

  • BSPS 2A.1 Metal tie back cover

    Download

    file-icon

  • BSPS 2A.2A Henry Tie Back Cover

    Download

    file-icon

  • BSPS 2B.1A Back lagged soldier pile plan view

    Download

    file-icon

  • BSPS 2B.1B Back lagged soldier pile plan view

    Download

    file-icon

  • BSPS 2B.2A Back lagged soldier pile isometric

    Download

    file-icon

  • BSPS 2B.2B Back lagged soldier pile isometric

    Download

    file-icon

  • BSPS 3A Membrane seam overlap with factory adhesive

    Download

    file-icon

  • BSPS 3B Membrane seam overlap with tape

    Download

    file-icon

  • BSPS 3C.1 Membrane seams at endlap

    Download

    file-icon

  • BSPS 3D.1 Inside corners

    Download

    file-icon

  • BSPS 3D.2 Inside corners

    Download

    file-icon

  • BSPS 3E Outside corners

    Download

    file-icon

  • BSPS 4A.1 Grade beam at concrete column or wall

    Download

    file-icon

  • BSPS 4A.3 Pile cap at steel column

    Download

    file-icon

  • BSPS 4A.4 Grade beam at steel column

    Download

    file-icon

  • BSPS 4A.5A Grade beam at steel column with compacted earth

    Download

    file-icon

  • BSPS 4A.5B Grade beam at steel column with mudslab

    Download

    file-icon

  • BSPS 4B.1 Grade beam or footing at steel column

    Download

    file-icon

  • BSPS 4B.2 Grade beam or footing with steel column on slab

    Download

    file-icon

  • BSPS 4B.3 Grade beam or footing with steel column on slab

    Download

    file-icon

  • BSPS 4C.1 Grade beam or footing

    Download

    file-icon

  • BSPS 4C.2 Grade beam or footing

    Download

    file-icon

  • BSPS 4D.1 Pile cap flashing

    Download

    file-icon

  • BSPS 4D.2 Pile cap flashing

    Download

    file-icon

  • BSPS 5A Elevator pit

    Download

    file-icon

  • BSPS 5B.1 Elevator lift plunger

    Download

    file-icon

  • BSPS 5B.2 Elevator lift plunger with blockout

    Download

    file-icon

  • BSPS 6A.1 Wall penetration single pipe

    Download

    file-icon

  • BSPS 6A.2 Wall penetration multiple pipes

    Download

    file-icon

  • BSPS 6B.1 Wall penetration single pipe sleeve

    Download

    file-icon

  • BSPS 6E.3 Form tie at soldier pile all thread

    Download

    file-icon

  • BSPS 6E.4B Form tie at soldier pile all thread

    Download

    file-icon

  • BSPS 6F.1 Grounding rod

    Download

    file-icon

  • BSPS 6H.1 Nelson stud

    Download

    file-icon

  • BSPS 7A.1 Deck to wall transition Blueskin WP200 transition at deck

    Download

    file-icon

  • BSPS 7A.2 Deck to wall transition Henry 790-11 transition at deck

    Download

    file-icon

  • BSPS 7A.3 Deck to wall transition Henry 790-11 transition at deck

    Download

    file-icon

  • BSPS 7B.1 Deck to wall transition Henry 790-11 transition at deck

    Download

    file-icon

  • BSPS 7B.2 Deck to wall transition Henry 790-11 transition at deck

    Download

    file-icon

  • BSPS 7C.1 Deck to wall transition Henry CM100 transition at deck

    Download

    file-icon

  • BSPS 7D.1 Deck to wall transition Pumadeq transition at deck

    Download

    file-icon

  • BSPS 7E.1 Deck to wall transition Prodeq transition at deck

    Download

    file-icon

  • BSPS 8A Vertical terminations

    Download

    file-icon

  • BSPS 9B.2 Slab penetration pipe or conduit

    Download

    file-icon

  • BSPS 9C Slab penetration pipe bank pitch pan

    Download

    file-icon

  • BSPS 9D.1 slab penetration well pipe sealing box out

    Download

    file-icon

  • BSPS 10.A1 Post applied transition Henry CM100 vertical wall transition at grade change

    Download

    file-icon

  • BSPS 10.B1 Post applied transition Blueskin WP200 vertical wall transition at grade change

    Download

    file-icon

  • BSPS 10.B2 Post applied transition Blueskin WP200 transition at grade change

    Download

    file-icon

  • BSPS 10.B3 Post applied transition Blueskin WP200 transition at masonry ledge

    Download

    file-icon

  • BSPS 10.B4 Post applied transition Blueskin WP200 transition at grade

    Download

    file-icon

  • BSPS 11.A1A Expansion joint vertical wall to vertical wall

    Download

    file-icon

  • BSPS 11.A1B Expansion joint vertical wall to vertical wall

    Download

    file-icon

  • BSPS 11.A2A Expansion joint vertical wall to vertical wall

    Download

    file-icon

  • BSPS 11.A2B Expansion joint vertical wall to vertical wall

    Download

    file-icon

  • BSPS 11.B1 Expansion joint deck to deck

    Download

    file-icon

  • BSPS 11.B2 Expansion joint deck to deck

    Download

    file-icon

  • BSPS Architectural Details ALL - CAD

    Download

    file-icon

  • BSPS Architectural Details ALL - PDF

    Download

    file-icon

  • Henry Living Building Challenge Red List

    Download

    file-icon

  • Chemical Compatibility

    Download

    file-icon

  • Partnership with Max Frank

    Download

    file-icon

  • Henry Company Warranty Coverage For Accessory Products

    Download

    file-icon

  • Henry Air Barrier and Waterproofing Membranes Earn Living Building Challenge Declare "Red List Free" Status

    Download

    file-icon

  • Henry Pre-Applied Waterproofing for Shotcrete

    Download

    file-icon

FEATURED CEU

Competitive, Constructable, Complete Specifying Total Envelope Solutions in a Low-Bid World

A whopping 90% of construction litigation is driven by moisture intrusion. That intrusion occurs within just 5% of the total surface area of the envelope. The culprit is always the same: transitions and penetrations. The roof must transition to the wall, the wall must transition to the foundation, the punched openings must be tied into the air barrier, the insulation must be installed over the air barrier, and the cladding goes overtop that... and on and on. What’s the challenge? We need the envelope to perform as a unified whole, but we specify, design, bid, VE, install, and inspect it in phases, which always involves multiple manufacturers and multiple trades. The industry is clearly consolidating around “total envelope solutions” provided by three to five horizontally integrated conglomerates, but we have not yet reached the inflection point: integrated envelope specifications/warranties. What’s it going to take to do things better?


1 AIA LU/HSW
1 IIBEC CEH

Construction Project Building Code Analysis: Generate a photo realistic image of building code analysts conducting a code analysis for a construction project, with building code books, code compliance review, architectural plans, and construction site overview visible; ensure the image is of high resolution for clear and detailed quality, with proper subject placement and clear edges.

Sustainability

  • Blueskin PreSeal™ 320 and 425 LEED Declaration

    Download

    file-icon

  • Blueskin PreSeal 320 Declare Label

    Download

    file-icon

  • Carlisle Waterproofing LEED Declaration – Full Product Line

    Download

    file-icon

  • Blueskin PreSeal Tape 50S LEED Declaration

    Download

    file-icon

  • Blueskin PreSeal Tape 120V LEED Declaration

    Download

    file-icon

Schedule a meeting with your Henry Advisor today