Synko-Flex® Emulsion Primer

Creates optimal surface for adhesion and bonding

Synko-Flex<sup>®</sup> Emulsion Primer

Synko-Flex® Emulsion Primer

Henry’s Synko-Flex® Emulsion Primer penetrates concrete surfaces to provide an optimal surface for the adhesion and bonding of Synko-Flex® or Hydro-Flex® preformed adhesive waterstops, and Ram-Nek® joint sealants. Formulated with a thin, environmentally safe solution of mineral colloid asphalt emulsion.

Features

  • Applies easily by brush
  • Readily penetrates concrete pores and surfaces
  • Odorless and non-flammable when wet
  • May be applied on damp or "green" concrete surfaces

Packaging

  • Available in one-gallon (8.98 lb) jugs and 55-gallon (205 liter/550 lb) drums

Complete the form below and a representative will contact you shortly!