Blueskin^® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.

Features

• SBS membrane flexible at low temperatures
• Fully adhered systems prevent lateral water movement
• No flame required
• Factory controlled thickness
• Negligible odor during application

Packaging

• Thickness - 60 mils (1.5 mm)
• Roll Length 66.7ft
• Roll Width - 36"
• Gross Coverage - 200 ft²
• Net Coverage* - 186 ft²

*Based on 65 mm laps both side and end laps

Literature

Henry Foundation Waterproofing Systems Brochure

Blueskin WP200 Declare Label

WP200 Sell Sheet

• Installation and Technical Literature

  Blueskin^® WP 200 Data Sheet  

  Blueskin^® WP 200 SDS Sheet  

  Blueskin^® WP 200 Health Product Declaration  

• Specifications

  Self-Adhered Waterproofing Membrane Guide Spec  

• Architectural Details

  ES-H101 – Foundation Wall Applications

  ES-H102 – Concrete Plaza Deck Applications

  ES-H103 – Wall/Footing Detail

  ES-H104 – Raised Slab Detail

  ES-H105 – Deck/Wall Downturn Detail

  ES-H106 – Deck/Wall Upturn Detail

  ES-H107 – Termination Bar Detail

  ES-H108 – Expansion Joint Detail

  ES-H109 – Precast/Expansion Joint Detail

  ES-H110 – Vent Detail

  ES-H111 – Projection Detail

  ES-H112 – Drain Detail

  ES-H116 – Inside Corner

  ES-H117 – Outside Corner

  PMDQ-TID-A3A Pumadeq System transition with Blueskin WP200

  PMDQ-TID-A3B Pumadeq System transition with Blueskin WP200

  PMDQ-TID-A3C Pumadeq System transition with Blueskin WP200

  PMDQ-TID-A3D Pumadeq System transition with Blueskin WP200

• LEED Declarations

  Blueskin WP200 LEED Declaration

• Health Product Declarations

  Blueskin® WP200 Health Product Declaration

• Videos

  Henry^® Blueskin Self Adhesive Membrane Primers

Tools